Broken headphones are a common annoyance and can be expensive. Many of us have to replace our pricey headphones because they keep breaking on us!
Have you ever experienced this? It’s a common occurrence for headphones to break. Whether it is the cord, the earbuds, or the whole headset itself that breaks, it can be aggravating and frustrating.
If you are looking for why your headphones keep breaking and what can be done to prevent them from breaking in the future then this article should help answer those questions.
Here are some of the reasons that could be breaking your headphone
Table of Contents
MisHandling Headphone
As you might have guessed, the most common reason why headphones break is due to mishandling. One of the main reasons why people end up breaking their expensive electronics is that they don’t take care of them and try too hard to cram them into a tight space when they’re not in use. This can put stress on those parts which are more prone to being broken if not handled properly. If your headphone cord has started coming apart from where it meets with earbuds then this could be why; however, there are other causes for damage as well.
Wear and Tear or bad charging
The second-most common reason why our headphone’s seem so fragile is because the wiring inside becomes exposed or frayed over time through wear and tear or bad charging practices. All it takes is a single strand of wire to break and your headphones are unusable.
Moisture inside Headphone
The third-most common cause why headphone’s may be breaking could have been due to some moisture getting inside the plastic shell as well, which can lead to corrosion or even mold build up over time. If this has happened on one side then you’ll notice something rattling around when you shake them because that part will not seal properly anymore.
Water On Headphone
The same things goes for if water managed to get near any metal parts, such as where chord meets earbuds; those two materials do not mix very well together since they both conduct electricity poorly, so unless you’re using an all-plastic pair of headphones please make sure there’s always enough space between them to prevent that from happening.
If you suspect your headphone’s may have been exposed to any water or moisture, unplug them and let them dry thoroughly before using again.
Rolling Over the Headphones Cord
The fifth reason for breaking headphones is rolling over the headphone cord. Sometimes you may think that your headphones are broken but it’s actually just a problem with the jack or plug. This can be solved by checking to see if the wire is loose, replacing the plug, or buying a new pair of earphones.
If you’re using an iPhone and have these problems, try changing your settings so that audio automatically switches from one earbud to another when in use. Another way to prevent this issue is by wrapping up your headphone cords around your phone case while not in use. And finally, don’t tug on the wires too hard because this can cause them to break more easily than usual
Letting The Cord Dangle
Headphones are not meant to be worn around your neck. When the cord is dangling, it can get caught on things and break. If you’re using an extension cord, make sure it’s long enough so that when you walk or move your head the wire doesn’t come out of the device.
Make sure to tuck in all cords if they’re too long (e.g., charging cables) Don’t put headphones in a pocket with other items – this could cause them to snag onto something else and break. Keep your headphones away from water, heaters, microwaves or any other source of extreme temperatures
Winding the Cord into Knots
When you wind your cord into knots, you are putting a lot of pressure onto that one spot which causes the wire to break at that point
When this happens, you will have no choice but to buy new ones because there’s nothing else you can do about it 6. If you want to avoid this from happening to your headphones, just don’t wind the cord up into knots!
Conclusion:
If you’re experiencing the same issue, consider these factors before giving up on your favorite headphones. Some of these may include a faulty wire or connection point that is causing it to break at this particular spot every time. It could also be due to wear and tear over long periods of use – in which case you’ll need new earphones for better quality sound anyway
